BITUMINOUS WATERPROOFING

Soprema’s bituminous waterproofing membranes are characterised by resistance and longevity boasting superior service life, excellent quality and high performance waterproofing solutions for flat roof constructions.

Warm, cold, single layer and Inverted flat roof waterproofing systems are available to provide a solution for all types of flat roof construction, whether you have a new build or refurbishment project, Soprema’s bituminous flat roof systems are BBA certified, impact and tear resistant and provide a guaranteed, robust and watertight solution for your project. Flame-free waterproofing options are also available for project where hot works are restricted.

45 products

  • AQUADERE

    Water based, solvent free, bituminous primer.
  • ELASTOCOL 500

    Cold applied, high bond SBS bituminous primer.
  • SOPRADERE QUICK

    Cold applied, fast drying bitumen primer.
  • ELASTOCOL 600

    Cold applied bituminous primer, with a self-adhesive membrane activator within it.
  • SOPRASPRAY

    Spray applied bituminous primer.
  • SOPRAVAP 3 IN 1

    A two component, Polyurethane based, liquid vapour control layer that performs 3 functions: - bituminous primer - vapour control layer - cold applied adhesive
  • SOPRAMASTIC 200

    Ready to use bituminous mastic composed of rubber-based plasticised bitumen, fibres and mineral fillers
  • SOPRACOL LIQUID

    Cold applied, bituminous adhesive.
  • VENTIROCK SBS 3 TF

    Membrane composed of SBS modified bitumen with a composite polyester reinforcement. The upper surface is finished with talcum/sand. The lower surface has thermally activated SBS stripes alternated with non-stick stripes,…
  • SOPRASTICK VENTI FF

    Self adhesive membrane composed of SBS modified bitumen with a composite polyester reinforcement. The upper surface is finished with a torch on film. The lower surface is finished with self…
  • SOPRASTICK

    Membrane composed of SBS modified bitumen with a composite polyester reinforcement. The self-adhesive surface on the underside is protected by a silicone release film and the upper surface is protected…
  • SOPRALENE FLAM 180 TF

    Membrane composed of SBS modified bitumen with a polyester reinforcement.The upper surface is finished with sand/talcum. The lower surface is protected by a thermofusible film. Reinforcement = 180 gr
  • SOPRALENE FLAM 250 TF

    Membrane composed of SBS modified bitumen with a polyester reinforcement. The upper surface is finished with sand/talcum. The lower surface is protected by a thermofusible film. Reinforcement = 250 gr.
  • SOPRAVAP EVA 35

    Membrane composed of SBS modified bitumen with a composite aluminium and a fiberglass reinforcement.
  • SOPRAVAP STICK ALU S 16

    Self-adhesive membrane composed of SBS modified bitumen and a composite aluminum reinforcement. The upper surface is finished with talcum/sand. Used as a vapour control layer on steel deck or concrete…