COLPHENE BSW HP UNILAY

COLPHENE BSW UNILAY HP is a waterproofing membrane composed of a select blend of highperformance
flexible SBS elastomeric bitumen combined with a ultra high strength double reinforcement
system (heavy duty non-woven polyester associated with an additional specific fleece).

Product name so as displayed

COLPHENE BSW HP UNILAY

Long description, Frame of uses, Advantages

The topside is covered with specially engineered carbon dioxide crystals and the underside is covered by a
thermofusible plastic film.
Thanks to its special formulation and composition COLPHENE BSW UNILAY HP has excellent,
continuous and homogenous bond to poured structural concrete, increased resistance to hydrostatic
pressure and superior resistance to tears and punctures.
Its unique design, including the DUO SELVEDGE technology, allows welding of side laps using a torch or a
hot air gun. COLPHENE BSW UNILAY HP is a pre-applied membrane designed for horizontal blind side waterproofing
applications (below grade and tanking works).

Composition, technical characteristics, consuption, colors

Reinforcement: Heavy duty non-woven polyester associated with an additional specific fleece
Binder: Elastomeric bitumen select blend of high-performance bitumen and SBS* thermoplastic polymers
Topside: Specially engineered carbon dioxide crystals
Underside: Thermoplastic plastic film

Needed tools, installation instructions

COLPHENE BSW UNILAY HP is installed loose laid on the concrete slab or compacted soil. To prevent overly thick membranes, stagger the end laps by a minimum of 300 mm. Side lap joints must be a minimum of 120 mm (see DUO SELVEDGE rubric below) and end lap joints must be a minimum of 150 mm. Membrane overlaps are torched-on. All angles changes (inside and outside corners) and others details must be reinforced by heat-welding on additional 300 mm piece of COLPHENE BSW UNILAY HP centered on the angle. COLPHENE BSW PROTECT’R, as a protection layer, is not necessary over the COLPHENE BSW UNILAY
HP if the reinforcement steel bars installation and pouring of the concrete slab are carried out carefully. DUO SELVEDGE
Over the entire width of DUO SELVEDGE, 40 mm of the surface is covered with exposed sticky bitumen. The remaining surface of the selvedge (80 mm) is covered by a thermofusible plastic film to seal overlap by torch-on techniques.

Unit of packaging, dimensions, volume, weight

Thickness: 4,5 mm (-5% ; +5%)
Weight: 5 kg/m2
Dimensions of the roll: 8 m x 1 m
Weight of the roll: about 40 kg

Quantity per pallet or box, storage precaution & duration

Rolls must be stored upright, with the selvedge side on top. If the product is stored outdoors, cover them with an opaque protective cover after removal of the delivery packaging

CE marking, related regulation

Sample request

  • This field is for validation purposes and should be left unchanged.