SOPRADVANCE CONCRETE COMPOUND

SOPRADVANCE CONCRETE COMPOUND is a fast‐curing sealer used on damp concrete substrates.

Product name so as displayed

SOPRADVANCE CONCRETE COMPOUND

Long description, Frame of uses, Advantages

• can be used on damp concrete substrates
• easy to apply
• fast-curing
• very good adhesion on absorbent substrates
• resistant to rising moisture
• hydrolysis and alkali resistant
• functions as a moisture barrier

SOPRADVANCE CONCRETE COMPOUND is used for the pre‐treatment of damp, including newly poured
7 days old, concrete substrates in preparation for the subsequent application of a bituminous SOPREMA
waterproofing system.
SOPRADVANCE CONCRETE COMPOUND
forms a barrier against capillary rising moisture on concrete
substrates with high residual moisture content.
SOPRADVANCE CONCRETE COMPOUND
cannot be used as a moisture barrier below the waterline.

Composition, technical characteristics, consuption, colors

3-component, fast-reactive, fast‐curing resin with a mixture of cement based fillers.

Consumption: Depending the nature of the surface 0,8 to 1,2 kg/m2 is used. In some cases the consumption can be higher.

Needed tools, installation instructions

• Substrate preparation
SOPRADVANCE CONCRETE COMPOUND must only be applied to a sufficiently set and prepared
substrate. Please refer to the appropriate application guide for information about correct surface preparation.

• Mixing
First stir the resin compound (part A) thoroughly and mix in the cement based filler (part B). Stir for at
least 5 minutes until a smooth consistency without lumps is achieved. Make sure that all material on the
side and base of the pot is mixed in. In order to ensure this, it may be useful to re-pot the mixture and stir
again. Now add the activator whilst stirring at a low speed for 2 minutes. Make sure that all material on the side
and base of the pot is mixed in. At temperatures below +10 °C the product should be stirred for 4 minutes
as the activator will take longer to dissolve.

• Application
Use a rubber squeegee to apply an even coat. Immediately work the sealer well into the surface.
It is essential that the product is worked well into the surface to ensure good adhesion to the substrate.

Unit of packaging, dimensions, volume, weight

18,6 kg Part A (resin)
10,0 kg Part B (cement based filler)
28,6 kg
The kit is supplied without activator.

Quantity per pallet or box, storage precaution & duration

Store in original sealed packaging in a cool, dry and frost-free place. Avoid warm storage areas (> 30 °C)
even for brief periods, for example on site. Consequently, the products must not be exposed to direct
sunlight or kept in a vehicle. Unopened products have a shelf life of at least 12 months. After opening,
reseal the packaging so it is completely airtight.

Downloads

COMMERCIAL DOCUMENTATIONS

TECHNICAL DATA SHEET

Send by email

  • This field is for validation purposes and should be left unchanged.

Sample request

  • This field is for validation purposes and should be left unchanged.